English  |  日本語  |   繁體中文  |  簡体中文
               Products
Industrial Motherboards
Disk-Size SBCs
ETX
CompactPCI
PC/104 Plus
Accessories
Barebone Systems
Network Security Appliance
iGUARD DVR System
Home
ETX CPU MODULE
ET710
Intel® Mobile Pentium® III ETX Module with VGA/LAN/Audio


Click to enlarge

Features
Specifications
Ordering Information
Datasheet

FEATURES

  		• Supports Intel® Mobile Intel® Pentium® III Processor-M or ULV Celeron®
  		• 100MHz / 133MHz FSB, up to 933MHz CPU clock
  		• Intel® 815EB chipset, ATI M6 VGA controller
  		• 8MB/16MB VGA memory, CRT/LCD support
  		• Intel® 82801 10/100 LAN with Intel® 82562E PHY
  		• One SO-DIMM socket for up to 512MB SDRAM
  		• 2 COM ports, 4 USB, Watchdog timer, PCI to ISA Bridge
  		• 95mm x 114mm (3.74" x 4.5")

    ET710 SPECIFICATIONS


    CPU
    Intel® Mobile Pentium® III or Ultra Low Voltage Intel® Celeron® processor 400MHz-933MHz


    CPU Voltage
    0.95V~1.85V


    CPU Front Side Bus
    100Mhz / 133MHz

    Chipset
    Intel® 815EB Chipset
    GMCH: 82815, 544-pin BGA packaging
    ICH2: 82801BA, 360-pin BGA packaging
    FWH: Winbond 49V002F(2Mb)

    L2 Cache
    CPU integrated (256K or 512K)

    BIOS
    Award BIOS, ACPI supported

    System Memory
    One SO-DIMM socket

    Max. 512MB PC100/133 modules

    VGA Function
    ATI M6 VGA controller

    8MB/16MB embedded VGA memory
    Supports CRT, TFT panel (24-bit LVDS)

    Ethernet Function
    Intel® 82801 built-in with Intel® 82562E PHY
    10/100BaseT support

    Audio Function
    ICH2 built-in audio controller

    AC97 Codec STAC9721

    Supports Line-out, Line-in, Mic. interface

    LPC I/O Chipset
    Winbond 83627: IrDAx1 Parallel x1, COM1/2 (RS-232), FDC, Hardware monitoring

    IDE interface (on baseboard)
    ICH2 built in. IDE interface supports 2 IDE devices in UDMA/33, PIO mode 4 and bus master mode

    Parallel Port (on base board)
    One parallel port supports SPP/EP


    Serial Ports (on baseboard)
    Two RS-232 ports

    USB Ports (on baseboard)
    Up to 4 USB 1.1 ports supported


    PCI to ISA Bridge

    Winbond 83628 + Winbond 83629

    Supports 3 ISA compatible slots

    Watchdog Timer
    Generates system reset; 256 levels

    ETX Interface
    Four connectors for PCI-bus, USB, Audio, VGA, LCD, COM1, COM2, LPT, Floppy, IrDA, Mouse, Keyboard, IDE1, IDE2, Ethernet, ISA

    Form Factor
    ETX form factor

    Dimensions
    95mm x 114mm (3.74" x 4.49")


    Environmental Factors:


    Operating Temperature

    0°C~60°C (32°F~140°F)


    Storage Temperature


    -20°C~80°C (-68°F~176°F)


    Relative Humidity

    10%~90% (non-condensing)


    Ordering Information:

    ET710-400

    Intel® Mobile Celeron® 400MHz, ATI M6 with 8MB VGA controller, 82801 LAN
    ET710-933

    Intel® Mobile Intel® Pentium® III Processor-M 933MHz, ATI M6 with 16MB* VGA controller, 82801 LAN
    IP100 5.25" base board with ETX interface
    IP300 3.25" base board with ETX interface
    IP350 3U CompactPCI base board with ETX interface


    *16MB is now standard for ET710-933, not optional.
     
    |
    |
    |
    |
    |
    Copyright 2004 IBASE Technology Inc. All rights reserved.