IBASE

RISC Platform

IBR210

Low-Power Multimedia IoT 3.5” SBC with NXP ARM® Cortex-A53 i.MX 8M Dual 1.5GHz Processor

With NXP Cortex™-A53, i.MX 8M Dual 1.5GHz processorSupports HDMI, Dual LVDS to 4K HDRSupports 2GB DDR4, 8GB eMMC and SD socketSupports embedded I/O for COM, GPIO, USB3.0, USB-OTG, audio and Ethernet.Supports M.2 Key-E (2230) and Mini-PCI-E w/ SIM socket for wireless connectivity

The IBR210 3.5-inch single board computer features NXP’s dual or quad core Arm Cortex-A53 i.MX 8 processors in 1.3GHz and 1.5GHz CPU frequencies. The i.MX 8 application processors are built with advance media processing, allowing IBR210 to deliver 4K HDMI content with HDR and run a dual-channel FHD LVDS display. The board is targeted at multiple signage displays at airports, train and bus stations, and shopping malls, as well as HMI passenger information applications.

The IBR210 provides industry-leading multimedia processing for a wide range of IoT applications, with flexible memory options and high-speed interfaces. Measuring 102 x 147mm, the SBC features soldered 3GB LPDDR4 system memory on board and 8GB to 64GB eMMC flash memory, and rich I/O connectivity including one GbE RJ45, two USB 3.0, a USB OTG, an HDMI, a serial port and an SD socket. Also supported are two USB 3.0 ports from internal headers, M.2 Key-E and mPCIe expansion, a power input of 12V~24VDC via a DC-in jack and a -40°C~85°C wide operating temperature range.

IBASE provides Board Support Package (BSP) for Android 9 and Yocto Linux v2.5 operating systems to help customers quickly build their Android and Linux solutions and long life time supply with the NXP solution.


Form Factor 3.5-inch Disk-Size SBC
CPU NXP Cortex™-A53 i.MX 8M Dual 1.5GHz processor
System Memory 2GB DDR4 on board
Flash Memory 8GB eMMC on board
Display Dual LVDS, 4K HDR10
1x HDMI V2.0a, up to 4096*2160 at 60Hz HDCP2.2
Video Codec Encoder: FHD 1080p 30 H.264.
Decoder: UHD 4Kp 60 HEVC/ H.265 10-bit MP, RV9,
AVC/ H.264, VP8, MPEG-2, MPEG-4p2, VC-1, AVS/
AVS+, MJPEG, H.263
Graphics OpenGL 3.1, OpenCL 1.2, Vulkan
LAN 10/100/1000 Mbps
Touch USB headers
Audio 2x 5 pin header, pitch 1.0 mm for Line-in/out
RTC IDT 1337AGDVGI8
Watchdog 256 Levels, 0~128 secs
Edge I/O 1x GbE (RJ45 connector)
2x USB 3.0 Type-A, 1x USB OTG Mini-USB
1x HDMI V2.0a
1x RS232/422/485 (D-SUB 9 male connector)
1x SD socket (UHS-I SDR-104, 104MB/s max.)
1x Reset button
Header, Expansion & LEDs 1x Backlight, 3.3V/1A, 5V/1A, 12/1A (jumper selection)
1x 4-pin wafer (for Debug Console Port)
1x Audio pin Header (Line-in and Line-out)
2x 2-wire UART pin header
2x USB 3.0 by pin header
1x M.2 Key-E (2230) w/ USB, SDIO, UART, PCI-E
1x Mini PCI-E (USB only) w/ SIM Socket
3x Green LEDs (for Power On/Off, Wireless status, and Programmable)
8x GPIO (2*5 pin header 1.0mm)
1x MIPI-CSI (2*10 pin header)
Dimensions 147mm x 102mm (5.8” x 4”)
Power 12V DC-in by DC-Jack
Operating Temperature -40°C ~ 85°C (-40°F ~ 185°F) with heatsink
Devices WIFI/BT module (option)
3G/GPS module (option)
Software Support Android / Yocto Linux
Relative Humidity 10%~90% (non-condensing)
Certification CE/ FCC Class B
IBR210 3.5” ARM-based SBC, Cortex™-A53 i.MX 8M Dual 1.5GHz, 2GB DDR4, 8GB eMMC, Dual LVDS, HDMI, RS-234/422/285, USB, M.2 Key-E(2230) and Mini PCI-E w/ SIM socket
Cable PK1-100A, Debug
IVT-76, Backlight
LCD403, Panel cable for 7”
LCD404, Panel cable for 15”
PK1-124, GPIO
PK1-133, COM port
USB-81, USB OTG cable
RF module ENL-B4356M2I, Wifi + BT (M.2 card Type 2230)
UC20G, Cellular UMTS/HSPA+, (Mini PCI-E)
Display AM-1024600ATMQW-A0H:
- 7” Capacitive LVDS TFT LCD , 1024 x 600
M150GNN2 R1:
- 15” Capacitive LVDS TFT LCD, 1024 x 768
LM215WF3-SLS1:
- 21.5” Transmissive LVDS TFT LCD, Full HD