(
| Form Factor | Carrier Board Compliant with SMARC™ V1.0 |
| Edge I/O | 1x DC-in Jack (12V) 1x Gigabit 1x Mic+Headphone 2x USB 2.0 host 1x USB OTG 1x HDMI 1x COM (RS232/422/485) |
| Jumpers, Switch & Buttons | 1x Boot media select switch (SD/eMMC) 1x Reset button 1x Power button 1x GPI button 1x RS232/422/485 (by jumper selection) 1x Backlight power jumper |
| Internal I/O | 2x CAN bus 2.0B 1x 18/24-bit single CH LVDS 1x 18/24-bit TTL box header 1x LCD DDC (I²C) 1x LCD backlight connector 1x CSI-MIPI 2x USB 2.0 host 8x GPIO pin header 2x RS232 box header 1x SIM socket 1x SPDIF 1x Speaker box header 1x Micro-SD socket 2x I²C 1x SATA II 1x Full-size Mini PCI-E with USB interface |
| Dimensions | 170mm x 170mm (6.7” x 6.7”) |
| Power Input | 19V DC-in |
| Environment | Humidity: 0% to 90% RH at 60° C (non-condensing) Vibration: Non-operating, 3Hz to 500Hz, 15mins |
| Operating Temperature | -40°C to 85°C (-40°F to 185°F) |
| Certification | CE/FCC Class A |
| Devices | Depending on the CPU module |
| RP-102-SMC | RISC Carrier Board for SMARC V1.0 modules,12V DC-in, Mini-ITX 170mmx170mm, 2x CAN, Mini PCI-E with USB, Resistive touch header (4-wire), 2x USB header,1x I²C header, 18/24-bit LVDS,TTL connector, Line in/ Line out, EEROM, CSI MIPI bus, 8x GPIO, 2x RS232, 1x RS232/422/485, VDDIO=3.3V |
| DATASHEETS |
|
||||
| CATALOG |
|
||||
| MANUALS |
|
RELATED PRODUCTS
